| 贯通式潜孔锤反循环钻头的结构优化 |
| |
| 引用本文： | 关晓琳,殷琨,朱丽红,孟祥瑞,范黎明.贯通式潜孔锤反循环钻头的结构优化[J].探矿工程,2011,38(2):54-56. |
| |
| 作者姓名： | 关晓琳 殷琨 朱丽红 孟祥瑞 范黎明 |
| |
| 作者单位： | 吉林大学建设工程学院,吉林长春130026 |
| |
| 基金项目： | 中国地质调查局地质调查项目（DK0003042）——潜孔锤反循环钻具系列化研究及应用（200020170122） |
| |
| 摘 要： | 针对Φ89 mm反循环钻头取心短且带裙边的问题,对其碎岩过程进行有限元软件ANSYS数值模拟分析。根据分析结果提出合理设计方案,再对新钻头进行有限元数值分析,并与原设计进行对比分析,同时进行室内试验验证。结果表明,优化后的钻头取出的岩心较长、较完整且不带裙边,优化方案合理可行。
|
| 关 键 词： | 贯通式潜孔锤 反循环钻头 有限元 结构优化 |
| 收稿时间： | 2010/10/15 0:00:00 |
| 修稿时间： | 2011/1/12 0:00:00 |
Structure Optimization of DTH Reverse Circulation Bit |
| |
| GUAN Xiao-lin,YIN Kun,ZHU Li-hong,MENG Xiang-rui and FAN Li-ming.Structure Optimization of DTH Reverse Circulation Bit[J].Exploration Engineering(Drilling & Tunneling),2011,38(2):54-56. |
| |
| Authors: | GUAN Xiao-lin YIN Kun ZHU Li-hong MENG Xiang-rui and FAN Li-ming |
| |
| Institution: | (College of Construction Engineering,Jilin University,Changchun Jilin 130026,China) |
| |
| Abstract: | Aiming at the problem of short coring sample with skirt of 89mm reverse circulation bit,numerical simulation analysis was made on the breaking process with finite element software ANSYS.According to the analysis results,reasonable design scheme was put forward.The further analysis was made on the new bit with finite element numerical simulation and the comparative analysis and indoor experiment on the original design were carried out.The results indicate that the optimized bit has longer,complete coring sample without skirt. |
| |
| Keywords: | DTH reverse circulation bit finite element structure optimization |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《探矿工程》浏览原始摘要信息 |
| 点击此处可从《探矿工程》下载免费的PDF全文 |
|
