首页 | 本学科首页   官方微博 | 高级检索  
     检索      

RTK高程和Heave信号的融合及精度分析
引用本文:阳凡林,赵建虎,张红梅,韩晓冬.RTK高程和Heave信号的融合及精度分析[J].武汉大学学报(信息科学版),2007,32(3):225-228.
作者姓名:阳凡林  赵建虎  张红梅  韩晓冬
作者单位:1. 山东科技大学地球信息科学与工程学院,266510
2. 武汉大学测绘学院,430079
3. 武汉大学动力与机械学院,430072
基金项目:国家自然科学基金;基础地理信息与数字化技术山东省重点实验室开放研究基金资助项目
摘    要:对RTK高程和Heave信号在合成之前进行了预处理,确保了短周期内两者监测尺度和时间上的一致;然后利用数字信号处理技术实现这两个信号的融合;并通过一个实验对信号合成方法的精度进行了全面的分析和评估,认为该方法可以达到约6~7cm的精度,将传统多波束数据处理方法的精度提高了1倍。

关 键 词:RTK高程  涌浪  信号合成
文章编号:1671-8860(2007)03-0225-04
修稿时间:2006年12月25

Blend of RTK Height Signal and Heave Signal and Accuracy Analysis
YANG Fanlin,ZHAO Jianhu,ZHANG Hongmei,HAN Xiaodong.Blend of RTK Height Signal and Heave Signal and Accuracy Analysis[J].Geomatics and Information Science of Wuhan University,2007,32(3):225-228.
Authors:YANG Fanlin  ZHAO Jianhu  ZHANG Hongmei  HAN Xiaodong
Abstract:In order to eliminate the shortcomings of traditional methods in multibeam data processing,a kind of new method,which is based on the blend of RTK height signal and heave signal,is presented.Three kinds of methods,which are used for blending the two signals,are researched.They are constrained blend method,signal-processing method with Butterworth filter and FFT spectrum analysis method respectively.For the former two kinds of methods,they can not meet with the requirements of strict time synochronization and maximum magnitide respond in signal processing,thus,FFT spectrum analysis technology is finally introduced,which overcomes the shortcomings of the other two kinds of methods.Finally,the accuracy of signal blending method is discussed with a complicated multibeam surveying experiment.An all-around analysis is done.The below results can be obtained through analysis,comparison and calculation.The signal blending method can achieve standard deviation about 6 cm,and can meet with the requirement of precise projects underwater monitoring seabed/riverbed.
Keywords:RTK height  heave  signal blend
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号