Drilling and Constructing Monitoring Wells with Hollow-Stem Augers Part 2: Monitoring Well Installation |
| |
| Abstract: | The procedures used to construct monitoring wells with hollow-stem augers may vary depending on the hydrogeologic conditions at the site. In cohesive materials in which the borehole stands open, the auger column may be fully retracted from the borehole prior to the construction of the monitoring well. In non-cohesive materials in which the borehole will not stand open, the monitoring well may be constructed through the hollow axis of the auger column.
The techniques used to construct monitoring wells through the hollow axis of the auger column may vary depending on the specific site conditions and the experience of the driller. Selection of an appropriately sized diameter hollow-stem auger for the installation of the required size of well casing is necessary to permit an adequate working space between the casing and augers, through which filter pack and annular seal materials are emplaced. Assurance that the filter pack and annular seal are properly emplaced is typically limited to careful measurements taken and recorded during construction of the monitoring well. |
| |
| Keywords: | |
|
|
