Identification of deformation and failure characteristics in cataclinal slopes using physical modeling |
| |
| Authors: | Chia-Ming Lo Meng-Chia Weng |
| |
| Institution: | 1.Department of Civil and Disaster Prevention Engineering,National United University,Miaoli,Taiwan;2.Department of Civil and Environmental Engineering,National University of Kaohsiung,Kaohsiung,Taiwan |
| |
| Abstract: | This study investigates the deformation characteristics of cataclinal slopes in central Taiwan prior to landslide failure. Field surveys and physical model tests were performed to explain the gravitational deformation characteristics of cataclinal slopes under various conditions and to derive the deformation process and failure characteristics. The results show that the distribution of erosion gullies (different length of the slope mass), the extent of erosion (different thickness of the slope mass), the foliation dip angle, and the geological material critically affect the deformation of cataclinal slope masses in the study area. The results of physical model tests indicate that increasing the foliation dip angle, the thickness and the length of sliding mass, particle size (spacing between foliations) increases the depth of slope deformation. Foliation dip angle is the most critical factor that controls the deformation of slate slopes. When the cataclinal slopes reached maximum deformation, a shear failure and translational slide occurred within a short period. The deformation zone exhibited significant cracking at the scarp and the bulging of the slope toe, which facilitated the infiltration of surface water and groundwater, accelerating the deformation to failure. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
