Performance of pile-restrained flexible floating breakwaters |
| |
| Authors: | Ioanna Diamantoulaki Demos C Angelides George D Manolis |
| |
| Institution: | aDepartment of Civil Engineering, Aristotle University of Thessaloniki, Thessaloniki 54124, Greece |
| |
| Abstract: | The overall performance of pile-restrained flexible floating breakwaters is investigated under the action of linear monochromatic incident waves in the frequency domain. The aforementioned floating breakwaters undergo only vertical structural deflections along their length and are held in place by means of vertical piles. The total number of degrees of freedom equals the six conventional body modes, when the breakwater moves as a rigid body, plus the extra bending modes. These bending modes are introduced to represent the structural deflections of the floating breakwater and are described by the Bernoulli–Euler flexible beam equation. The number of bending modes introduced is determined through an appropriate iterative procedure. The hydrostatic coefficients corresponding to the bending modes are also derived. The numerical analysis of the flexible floating breakwaters is based on a three-dimensional hydrodynamic formulation of the floating body. A parametric study is carried out for a wide range of structural stiffness parameters and wave headings, to investigate their effect on the performance of flexible floating breakwaters. Moreover, this performance is compared with that of the corresponding pile-restrained rigid floating breakwater. Results indicated that the degree of structural stiffness and the wave heading strongly affect the performance of flexible floating breakwaters. The existence of an “optimum” value of structural stiffness is demonstrated for the entire wave frequency range. |
| |
| Keywords: | Pile-restrained flexible floating breakwaters Fluid structure interaction Hydroelasticity Structural stiffness Breakwater response Breakwater effectiveness |
| 本文献已被 ScienceDirect 等数据库收录！ |
