| Abstract: | A two-dimensional nonlinear hydrodynamic model has been developed for studying the global scale winds, temperature, and compositional structure of the mesosphere and thermosphere of Venus. The model is driven by absorption of solar radiation. Ultraviolet radiation produces both heating and photodissociation. Infrared solar heating and thermal cooling are also included with an accurate NLTE treatment. The most crucial uncertainty in determining the solar drive is the efficiency by which solar radiation is converted to heat. This question was analyzed in Part I, where it was concluded that essentially all hot atom and O(1D) energy may be transferred to vibrational-rotational energy of CO2 molecules. If this is so, the minimum possible euv heating occurs and is determined by the quenching of the resulting excess rotational energy. The hydrodynamic model is integrated with this minimum heating and neglecting any small-scale vertical eddy mixing. The results are compared with predictions of another model with the same physics except that it assumes that 30% of radiation goes into heat and that the heating from longer-wavelength radiation includes the O(1D) energy. For the low-efficiency model, exospheric temperatures are ?300°K on the dayside and drop to < 180°K at the antisolar point. For the higher-efficiency model, the day-to-night temperature variation is from ?600°K to ?250°K. Both versions of the model predict a wind of several hundred meters per second blowing across the terminator and abruptly weakening to small values on the nightside with the mass flow consequently going into a strong tongue of downward motion on the nightside of the terminator. The presence of this circulation could be tested observationally by seeing if its signature can be found in temperature measurements. Both versions of the model indicate that a self-consistent large-scale circulation would maintain oxygen concentrations with ?5% mixing ratios near the dayside F-1 ionospheric peak but ?40% at the antisolar point at the same pressure level. |
