Seismic Zonation of the Delhi Region for Bedrock Ground Motion |
| |
| Authors: | Email author" target="_blank">M L?SharmaEmail author H R?Wason R?Dimri |
| |
| Institution: | (1) Department of Earthquake Engineering, Indian Institute of Technology, Roorkee, 247667, India |
| |
| Abstract: | An endeavor is made to compute peak ground horizontal accelerations at bedrock level in the Delhi region due to the seismogenic sources present around Delhi. The entire area is divided into six seismogenic sources for which seismic hazard analysis is carried out using the complete and extreme part of the seismicity data. Maximum likelihood estimates of hazard parameters viz., seismic activity rate  , b value and maximum probable earthquake M
max are made for each zone. The return periods and the probabilities of occurrence of various magnitudes for return periods of 50, 100 and 1000 years are also computed for each zone. The peak ground acceleration (PGA) values for 20% exceedance in 50 years are then computed for the Delhi region from each zone. The maximum PGA value considering all the zones is 0.34 g, which is due to the Mathura fault zone. The seismogenic zones V and VI, i.e., Mathura fault zone and the Sohna fault zone are observed to be contributing maximum PGA values in the Delhi region governing the isoacceleration contours computed for the region. The seismic zonation map for the PGA values at the bedrock level is obtained for the Delhi region. This can be used directly as input for the microzonation of ground motion at the surface by incorporating the local site conditions. |
| |
| Keywords: | Seismic zonation seismic hazard assessment Delhi seismotectonics microzonation |
| 本文献已被 SpringerLink 等数据库收录！ |
|
