| 基于非量测CCD摄像机的钣金件误差检测 |
| |
| 引用本文： | 张永军,刘经南,张祖勋,张剑清.基于非量测CCD摄像机的钣金件误差检测[J].测绘学报,2004,33(2):132-137. |
| |
| 作者姓名： | 张永军 刘经南 张祖勋 张剑清 |
| |
| 作者单位： | 武汉大学,遥感信息工程学院,湖北,武汉,430079;武汉大学,湖北,武汉,430072 |
| |
| 摘 要： | 提出利用非量测CCD摄像机进行钣金件高精度3维重建与制造误差检测.介绍直线段最小二乘模板匹配的基本原理;提出利用像面上的点、直线信息进行混合光束法平差,对工业钣金件的线框模型进行高精度3维重建;采用1维模板匹配技术直接获取复杂形状的物方参数;重建结果可以用于检测零件的制造误差.所开发的误差检测系统具有硬件成本低、自动化程度高等特点,实际图像数据的多次实验均取得很好的检测结果.
|
| 关 键 词： | 序列图像 非量测摄像机 3维重建 误差检测 最小二乘模板匹配 点、线混合摄影测量 |
| 文章编号： | 1001-1595(2004)02-0132-06 |
Imprecision Inspection of Sheetmetal Parts with Non-metric CCD Camera |
| |
| ZHANG Yong-jun,LIU Jing-nan,ZHANG Zu-xun,ZHANG Jian-qing.Imprecision Inspection of Sheetmetal Parts with Non-metric CCD Camera[J].Acta Geodaetica et Cartographica Sinica,2004,33(2):132-137. |
| |
| Authors: | ZHANG Yong-jun LIU Jing-nan ZHANG Zu-xun ZHANG Jian-qing |
| |
| Institution: | ZHANG Yong-jun~1,LIU Jing-nan~2,ZHANG Zu-xun~1,ZHANG Jian-qing~1 |
| |
| Abstract: | A new approach of three-dimensional reconstruction and inspection of industrial sheetmetal parts with non-metric CCD camera is proposed. Principle of line segment least squares template matching to extract precise points and lines from imagery is discussed. Wire-frame model of the sheetmetal part can be accurately reconstructed with hybrid point-line photogrammetry. One-dimensional template matching and direct object space solution is used to reconstruct complex shapes such as circles and connected arcs and lines. Producing imprecision can be inspected automatically or interactively by the results of reconstruction. The proposed inspection technique has the advantages of low cost of hardware and can run automatically and fastly. Inspection results of several parts are very satisfying. |
| |
| Keywords: | image sequence non-metric camera 3D reconstruction imprecision inspection least squares template matching hybrid point-line photogrammetry |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
