|
|||||
|
|
A Simple Pneumatic Device and Technique for Performing Rising Water Level Slug Tests |
|
| Authors: | Darrell I Leap |
| Abstract: | Transmissivity can be estimated by several well documented methods employing data from rising water level slug tests in wells. A very simple and relatively inexpensive system can be constructed to lower the water level in a well. Compressed air is injected through a sealed device called a well head manifold, which screws onto the casing top and contains an air pressure gauge, an air entry valve, a quick release valve and a multi-channel water level indicator or a pressure transducer. Either of the latter is lowered into the well prior to pressurization. Compressed air is injected into the casing at a low rate through the manifold, depressing the water level a desired amount. After stabilization, the quick release valve is opened and the air pressure inside the casing is reduced to atmospheric pressure instantaneously; the water level then starts to rise. Successive elevations of the rising water level are determined with the indicator or transducer and their elapsed times from valve opening are recorded. Plots of water level recovery vs. time can then be used to estimate transmissivity by the published methods of Cooper, Bredehoeft and Papadopulos (1967), Ferris and Knowles (1954) and Hvorslev(1951). All of the items used for construction, with the exception of the quick release valve, can be bought off the shelf. The valve can be easily constructed in a machine shop. The total cost of the device, exclusive of the transducer, should be less than $500. |
| Keywords: | |