Distinct element simulation of ultimate bearing capacity in jointed rock foundations |
| |
| Authors: | Hossein Salari-Rad Mohammad Mohitazar Morteza Rahimi Dizadji |
| |
| Institution: | 1. Department of Rock Mechanics, Faculty of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez Ave, Tehran, Iran
|
| |
| Abstract: | In this paper, distinct element method numerical modeling is applied to evaluate bearing capacity of strip footing rested on anisotropic discontinuous rock mass. As yet, a little work has been carried out to investigate the effect of joint set orientation on the bearing capacity of rock mass. Generally, the overall behavior of rock mass under loading is very complicated and such analysis should include deformation determination, sliding along discontinuities and failure of rock material. Failure mechanism of rock mass depended on both geometrical parameters of joint sets and strength parameters of rock mass. In this research, it is assumed that rock mass contains one joint set, and therefore the anisotropy in bearing capacity and rock behavior is only due to the existence and orientation of the joint set. In this study, by assuming constant strength parameters and using Mohr–Coulomb failure criterion for the single joint set and nonlinear Hoek–Brown failure criterion for rock material, variation of the bearing capacity values and the type of failure mechanism of rock mass with different joint set dips is investigated. The obtained results indicate that the ultimate bearing capacity of rock mass containing one joint set varies between 27 and 86 % of intact rock. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
