The geotechnical properties and behaviour of a pro-glacial lake clay, and its cementitious stabilization |
| |
| Authors: | FG Bell |
| |
| Institution: | (1) Department of Geology and Applied Geology, University of Natal, Durban, South Africa |
| |
| Abstract: | The Tees Laminated Clay forms a continuous deposit around the Tees estuary in north east England and was deposited in a proglacial lake which occupied the Teesside area during late Devensian times, disappearing about 13 000 years ago. It overlies till, with which it has a sharp contact and reaches a maximum thickness in parts of central Middlesbrough of just over 9 m. The laminations consist of alternating thin layers of clay and silt, and represent seasonal increments of sediment. Kaolinite and illite, with lesser amounts of chlorite, dominate the mineral composition. Quartz tends to account for less than 35%. The notable carbonate content may be diagenetic in origin. The birefringence ratio of the clay minerals indicates a medium degree of particle orientation which suggests a partially flocculated fabric.This laminated clay has a high plasticity. However, the liquid and plastic limits of the silty layers differ significantly from those of the clay layers or the bulk samples. The clay fraction has a greater influence on these limits than the silty fraction. In addition, the linear shrinkage, liquidity indices and consistency indices of the silty layers differ appreciably from those of the clay layers and the bulk samples. The laminated clay is inactive. The orientation of the laminations in relation to the direction of maximum principal stress influences the shear strength, the lowest strengths being developed when these orientations are between 30° and 60°. The stress paths, anisotropic ratios and values of Af indicate that the Tees Laminated Clay is normally consolidated or lightly overconsolidated. The McLamore–Gray concept possibly can be applied to the anisotropic strength behaviour.Tees Laminated Clay can give rise to problems during construction operations since it can lose strength significantly on remoulding. Accordingly, these soils were treated with cementitious materials to determine the extent to which their engineering behaviour was enhanced by the addition of such materials. © Rapid Science Ltd. 1998 |
| |
| Keywords: | laminated clay birefringence ratio plasticity anisotropic strength consolidation stabilization |
| 本文献已被 SpringerLink 等数据库收录！ |
|
