| 工业测量系统中常用曲线曲面转换参数的选取 |
| |
| 引用本文： | 张建军.工业测量系统中常用曲线曲面转换参数的选取[J].测绘学院学报,1995(1). |
| |
| 作者姓名： | 张建军 |
| |
| 摘 要： | 本文对工业测量系统中常用的空间曲线、曲面与测站坐标系之间的转换参数进行了研究，给出了转换参数的选取方法，列出了多种曲线及曲面与测站坐标系之间参数的选取方案。
|
| 关 键 词： | 工业测量系统，转换参数 |
The Selection of Transformation Parameters of Common Curve and Camber in the Industrial Measurement System |
| |
| Zhang Jianjun.The Selection of Transformation Parameters of Common Curve and Camber in the Industrial Measurement System[J].Journal of Institute of Surveying and Mapping,1995(1). |
| |
| Authors: | Zhang Jianjun |
| |
| Institution: | Zhang Jianjun |
| |
| Abstract: | The transformation parameters between the common curve (or camber) and the topocentric coordinate systern in the industrial measurement system are studied. The selection methods of transformation parameters are given andthe selection schemes of transformation parameters between the various curves (or cambers) and the topocentric coordinatesystem are listed. |
| |
| Keywords: | Industrial measurement system Transformation parameter |
| 本文献已被 CNKI 等数据库收录！ |
