Hazard mapping based on macroseismic data considering the influence of geological conditions |
| |
| Authors: | M L Sousa C S Oliveira |
| |
| Institution: | (1) Laboratório Nacional de Engenharia Civil, Lisbon, Portugal;(2) Instituto Superior Técnico, Lisbon, Portugal |
| |
| Abstract: | The object of this study is to consider directly the influence of regional geological conditions on the assessment of seismic hazard. It is assumed that macroseismic data at individual locations contain, in an average way, the influence of geological conditions.A Data Base referring to 199 historical (5) and instrumental (194, in the 1947–1993 period) events with macroseismic information in 1195 locations of Portugal was built. For any given seismic event, whenever macroseismic information was available at a location (town, village, etc.), an EMS-92 intensity value was estimated. To each one of those locations a geological unit, representing the most common type of soil, was assigned, based on the Geological Portuguese Map at a scale 1:500 000; the geological units were grouped into three categories: soft, intermediate and hard soils.The Data Base was used to determine the attenuation laws in terms of macroseismic intensity for the three different geological site conditions, using multiple linear regression analysis. The reasonability of the laws was tested by (i) checking residual distributions and (ii) comparing the map of isoseismals of important earthquakes with the isoseismals generated by the attenuation curves derived for each one of the three different soil classes, taking into consideration the soil class of each site. The main results of attenuation modeling are: high dispersion on macroseismic intensity data; all the models predict intensity values, for short hypocentral distances, lower than the ones observed; and for some important analyzed earthquakes and for the observed range of distances, the models confirm the expectancy that macroseismic intensity increases from hard to soft soil.The approach to obtain the hazard assessment at each location consisted in the use of the attenuation law specifically derived for the class of soil of that particular location. This method, which considers the influence of the regional geology, was illustrated with the mapping of hazard for the country for several return periods. Comparison with previous maps not taking into consideration the regional geological conditions emphasizes the importance of this new parameter. It can be concluded that (i) soil segmentation is clearly the cause for hazard increase in the region to the north of Lisbon, especially at sites with soft and intermediate soils as the ones in lower Tagus valley; the maximum increase on hazard is, in any case, less than one degree; (ii) when geological conditions are disregarded in the attenuation regression analysis, hazard pattern is similar to the one obtained for the case of hard soil everywhere. |
| |
| Keywords: | seismic hazard geological conditions attenuation laws statistical analyses Portugal |
| 本文献已被 SpringerLink 等数据库收录！ |
|
