| Abstract: | Different models were developed for evaluating the probabilistic three-dimensional (3D) stability analysis of earth slopes and embankments under earthquake loading using both the safety factor and the displacement criteria of slope failure. In the 3D analysis, the critical and total slope widths become two new and important parameters.The probabilistic models evaluate the probability of failure under seismic loading considering the different sources of uncertainties involved in the problem, i.e. uncertainties stemming from the discrepancies between laboratory-measured and in-situ values of shear strength parameters, randomness of earthquake occurrence, and earthquake-induced acceleration. The models also takes into consideration the spatial variabilities and correlations of soil properties.Five probabilistic models of earthquake-induced displacement were developed based on the non-exceedance of a limited value criterion. Moreover, a probabilistic model for dynamic slope stability analysis was developed based on 3D dynamic safety factor.These models are formulated and incorporated within a computer program (PTDDSSA).A sensitivity analysis was conducted on the different parameters involved in the developed models by applying those models to a well-known landslides (Selset landslide) under different levels of seismic hazard.The parametric study was conducted to evaluate the effect of different input parameters on the resulting critical failure width, 3D dynamic safety factor, earthquake-induced displacement and the probability of failure. Input parameters include: average values and coefficients of variations of water table, cohesion and angle of friction for effective stress analysis, scales of fluctuations in both distance and time, hypocentral distance, earthquake magnitude, earthquake strong shaking period, etc.The hypocentral distance and earthquake magnitude were found to have major influence on the earthquake-induced displacement, probability of failure (i.e. probability of allowable displacement exceedance), and dynamic 2D and 3D safety factors. |
