Experimental study on local scour around single oblong pier fitted with a collar in a 180 degree flume bend |
| |
| Authors: | Alireza MASJEDI Mahmood SHAFaEI BEJESTAN Abdolkarim ESFANDI |
| |
| Institution: | 1. Assist. Prof., Islamic Azad University Ahwaz Branch, Ahwaz, Iran;2. Prof., Shahid Chamran University, Ahwaz, Iran;3. MSc, Khuzestan Science and Research Branch, Islamic Azad University, Ahwaz, Iran |
| |
| Abstract: | In this work, investigation on the development of local scour around an oblong pier in a 180 degree flume bend is presented. Scour hole can cause failure of the bridge especially during the river floods. In this study, the use of oblong collars for reducing the effects of local scour at a bridge pier is presented together with the time aspect of the scour development. Tests were conducted using one oblong pier in positions of 60degree under one flow conditions. The study was conducted using a physical hydraulic model operated under clear-water conditions in cohesionless bed material. In this study, the time development of the local scour around the oblong pier fitted with and without collar plates was studied. Investigated was the effect of size and elevation collar on the time development of scour and its efficacy at preventing scour at a bridge pier. The time development of the scour hole around the model pier with and without a collar installed was compared with similar studies on bridge piers. The results of the model study indicated that the maximum depth of scour is highly dependent on the experimental duration. It was observed that, as the minimum depth of scour occurs for the square collar at width of 3B placed at elevation of 0.1B below the bed and the size of a collar plate increases, the scour decreases. Measuring depth of scouring based on experimental observation, an empirical relation is developed with regression coefficient 95%. |
| |
| Keywords: | Oblong pier Scour depth Time development Collar 180 degree bend |
| 本文献已被 CNKI 万方数据 ScienceDirect 等数据库收录！ |
|
