首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于功能试验的加速度传感器性能评价
引用本文:周正华,李永义,刘金进,任叶飞.基于功能试验的加速度传感器性能评价[J].地震地磁观测与研究,2013(5):277-282.
作者姓名:周正华  李永义  刘金进  任叶飞
作者单位:[1]南京工业大学,中国江苏210009 [2]中国地震局工程力学研究所,中国哈尔滨150080
基金项目:公益性行业科研专项(201108003、200808019)
摘    要:以二阶系统的动力方程为基础,计算不同固有频率和阻尼比下的传感器功能试验响应,讨论功能试验响应随频率和阻尼比的变化,给出了依据功能试验响应确定传感器固有频率和过冲响应比的计算方法,继而统计回归得到过冲响应比随阻尼比的变化关系式.基于传感器的频率响应分析,讨论阻尼比对传感器的幅频特性和相频特性的影响,认为阻尼比在0.68-0.70范围内传感器具有最佳的幅频与相频特性.最后,以传感器自振特性确定方法及性能评价分析为基础,提出基于功能试验的力平衡式加速度传感器性能评价方法,并通过实例对典型传感器的性能进行评价.

关 键 词:功能试验  频率响应  固有频率  阻尼比  加速度传感器

Function test based accelerotransducer performance evaluation
Zhou Zhenghua,Li Yongyi,Liu Jinjin,Ren Yefei.Function test based accelerotransducer performance evaluation[J].Seismological and Geomagnetic Observation and Research,2013(5):277-282.
Authors:Zhou Zhenghua  Li Yongyi  Liu Jinjin  Ren Yefei
Institution:1.Nanjing University of Technology, Jiangsu Province 210009, China; 2.Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China;)
Abstract:In this paper,on the basis of the dynamic equations of the second-order system,the function test response of sensor was calculated under the condition of different natural frequency and damping ratio,and the change of the functional test response with frequency and damping ratio was discussed,and the functional test response based the analytical method for natural frequency and step pulse overshoot response ratio of the sensor,and the relationship formula between the overshoot response ratio and the damping ratio was established by statistical regression.Based on the frequency response of the sensor,the effect of the damping ratio of the sensor on its amplitude-frequency and phase-frequency characteristics was discussed.The results show that the sensor was provided with the best amplitude-frequency and phase-frequency characteristics when its damping ratio was in the range of 0.68 to 0.70.Finally,function test based performance evaluation method of force balance accelerotransducer was proposed based on the analytical method of sensor's natural frequency and damping ratio and the performance evaluation and analysis of sensor,and the performance of typical force balance accelerotransducer was evaluated by example.
Keywords:function test  frequency response  natural frequency  damping ratio  accelerotransducer
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号