| 低纬子午环的仪器误差 |
| |
| 引用本文： | 彭青玉,陈林飞.低纬子午环的仪器误差[J].天文研究与技术,1997(Z1). |
| |
| 作者姓名： | 彭青玉 陈林飞 |
| |
| 作者单位： | 中国科学院云南天文台 |
| |
| 摘 要： | 对低纬子午环的仪器误差作了分类，包括制造误差、安装误差、仪器重力变形和热变形的影响，还分别列出了各种误差测量设备的制造误差、安装误差、读数零点偏差及其漂移的影响。文中强调了在该仪器误差修正中，不建立和使用任何误差模型，而是采用实时测定值，并且特别注意消除系统误差的影响，在这基础上，才能通过重复采数来压缩随机误差的影响。
|
| 关 键 词： | 低纬子午环 仪器误差 |
The Instrumental Errors of the LLMC |
| |
| Peng Qingyu,Chen Linfei.The Instrumental Errors of the LLMC[J].Astronomical Research & Technology,1997(Z1). |
| |
| Authors: | Peng Qingyu Chen Linfei |
| |
| Abstract: | The instrumental errors of the LLMC can be classified into processing errors,assembling errors and other errors from the deformations caused by gravity and heating.Among the processing errors,there are privot errors and the processing errors from the azimuthal positioning system besides the graduation errors in the divided circle.Among the assembling errors,there are the assembling errors of the divided circle,the reading scope and the telescope as well as the azimuth error,and the level error and collimation error existing in traditional meridian circles.Among the errors from the deformations caused by gravity and heating,there are the variation of optical axis from the flexure of the tube and the variation of the zenith point of the graduation circle caused by the heat deformation to the supportor of the reading scopes.Moreover,there are the variation of small displace and rotation between the primary and the secondary mirror in the tube at different temperatures, resulting in the change of the optical axis, the variation of the orientation of the level axis caused by the different temperatures between the left part and the right part of the axis and etc.All these errors need to be mearured and corrected from the observational results.There are some auxiliary optical systems to measure all the errors mentioned above,which include the inspecting system of the azimuth,electric level,axial collimating device and autocollimating plane mirror in the tube.Two specialities of the LLMC to measure and correct the instrumental errors are introduced in this paper.One is the direct elimination of some instrumental errors by rotating the horizontal axis with 180 degrees.The other is the real time measurement of some errors. |
| |
| Keywords: | LLMC Instrumental errors |
| 本文献已被 CNKI 等数据库收录！ |
|
