Modal Inversion Analysis for Geoacoustic Properties of the New Jersey Continental Shelf in the SWAT Experiments |
| |
| Abstract: | In this paper, inversion for bottom sediment properties at a site on the New Jersey continental shelf is studied as part of the Shallow Water Acoustic Technology (SWAT) project. A source towed at a constant water depth over a range of some tens of kilometers transmitted low-frequency continuous wave (cw) signals, which were measured on a bottom-moored vertical line array of receivers. For the along-shelf geometry, the zeroth-order asymptotic Hankel transform is then applied to the acoustic field at 50 Hz measured on the resulting synthetic aperture horizontal array created at each receiver depth. The resulting horizontal wave number spectra, which have peaks corresponding to the mode eigenvalues, are observed to have slightly different values at different receiver depths, and therefore, stochastic mode inversion is exploited to utilize all of the observed peak position information. The estimated sound-speed profile (SSP) for the upper 10 m of sediment is then compared with an inversion result obtained using midfrequency (2–16 kHz) chirp sonar pulses reflected at normal incidence from the sediment. Although obtained using totally different inversion techniques, both estimated profiles are shown to be in good agreement in the top 10 m of sediment. The acoustic field simulated using the inverted SSP also agrees well with the measured acoustic field at each receiver depth. Furthermore, simulated sound fields which use this profile as input data are shown to be effective in predicting the measurements obtained at a different frequency (125 Hz) and for a different (cross-shelf) geometry. |
| |
| Keywords: | |
|
|
