Experimental studies relating to microfracture in sandstone |
| |
| Authors: | JJ Gallagher Jr M Friedman J Handin GM Sowers |
| |
| Institution: | Texas A and M University, Center for Tectonophysics, College Station, TexasU.S.A. |
| |
| Abstract: | A fundamental understanding of the relation between stress concentrations at grain contacts and microfractures in granular aggregates is obtained through two-dimensional photomechanical model studies and is tested through observational studies of experimentally deformed sandstone discs, glass beads, and quartz sand.In uncemented aggregates, the state of stress in each grain is controlled by the manner in which the applied load is transmitted across grain contacts. The angles between lines connecting pairs of contacts and the axis of the principal load acting at the boundaries of the aggregate determine which of all contacts will be most highly stressed or “critical”. Microfractures follow that maximum principal stress trajectory which connects critical contacts, and they propagate through those points where the magnitude of the local maximum stress difference is the greatest. Microfractures, therefore, are extension fractures. It then follows that both the locations and orientations of fractures can be predicted if the state of stress in the grains is known.Positioning of critical contacts depends primarily on sorting, packing, grain shapes, and the boundary load conditions applied to the aggregate. Some critical contacts and, therefore, microfractures tend to join together in a series or “chain”. Orientations of chains are most strongly influenced by the direction of the maximum compressive load at the boundary of the aggregate. A hydrostatic load applied on the boundaries of an aggregate can cause microfracturing within grains. Orientations for microfractures and contact lines are random in poorly sorted aggregates, but they are influenced by packing in well sorted aggregates.Grains of cemented aggregates are more highly stressed at their centers than at contacts. By analogy, microfracture orientations depend strongly on the position of the greatest load axis and only slightly on the low-magnitude stress concentrations at contacts. These microfractures parallel the greatest principal stress trajectory in regions where the magnitude of the maximum stress difference is greatest. These observations lead to the conclusion that fractures in grains of cemented aggregates are also extension fractures and should exhibit a higher degree of preferred orientation than in uncemented counterparts.These conclusions hold when cementing materials have about the same elastic moduli as the grains. Cements may be so weak that the aggregate behaves as if it were uncemented in terms of microfracture fabric, or so stiff that the major part of the load is transmitted by the cement, and the composite is no longer an aggregate in the mechanical sense. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
