| 基于光子计数探测器的能谱CT的研究 |
| |
| 引用本文： | 徐品,陈奭,袁刚,张寅,郑健,邢晓曼,孙明山.基于光子计数探测器的能谱CT的研究[J].CT理论与应用研究,2015,24(6):819-825. |
| |
| 作者姓名： | 徐品 陈奭 袁刚 张寅 郑健 邢晓曼 孙明山 |
| |
| 作者单位： | 中国科学院苏州生物医学工程技术研究所, 苏州 215163 |
| |
| 基金项目： | 国家重大科学仪器设备开发专项，国家科技支撑计划，国家自然科学基金，江苏省自然科学基金 |
| |
| 摘 要： | 本文的目的是评估光子计数探测器对CT成像的性能的影响,我们对一款基于碲锌镉(CZT)的光子计数探测器进行了性能测试,并搭建一个成像平台。首先对探测器系统进行能量增益的校正以及坏像素点校正,以减少探测器响应的不均匀性对CT成像的影响。然后对探测器进行能量-阈值标定,以确定探测器的工作能量阈值。最终搭建成像系统,对X光能量分别大于36和45keV的数据,获得了模体的重建结果,并对结果进行了分析。
|
| 关 键 词： | 能谱CT 光子计数 能量增益校正 |
| 收稿时间： | 2015-09-06 |
Study of Spectral CT Based on a Photon Counting Detector |
| |
| Institution: | Suzhou Institute of Biomedical Engineering and Technology, CAS, Suzhou 215163, China |
| |
| Abstract: | The purpose of this paper is to evaluate the performance of the photon counting detector in CT. We tested the performance of a photon counting detector based on CZT, and built a tabletop X-ray CT scanner. Firstly, in order to reduce non-uniformity of the detectors, calibration of the energy thresholds and dead pixel correction were performed. Then calibration of the energy thresholds was applied to determine the working energy threshold of the detector. In the end we acquired projection data with two energy bins(36 and 45 ke V). The ART-TV algorithm based on the compressed sensing was performed to reconstruct the incomplete projection data. |
| |
| Keywords: | spectral CT photon counting energy gain correction |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《CT理论与应用研究》浏览原始摘要信息 |
| 点击此处可从《CT理论与应用研究》下载免费的PDF全文 |
|
