| 转动弹簧宏模型模拟剪力墙受力性能 |
| |
| 引用本文： | 皮天祥,傅剑平,李英民.转动弹簧宏模型模拟剪力墙受力性能[J].地震工程与工程振动,2007,27(2):74-80. |
| |
| 作者姓名： | 皮天祥 傅剑平 李英民 |
| |
| 作者单位： | 重庆大学,土木工程学院,重庆,400044 |
| |
| 基金项目： | 国家教育部博士学科点专项基金项目（9162002）. |
| |
| 摘 要： | 本文将剪力墙结构根据精度需要划分成若干6节点矩形单元,每个单元由2根斜置正交弹簧及联结的上下水平刚性横杆组成,2根斜置弹簧方向分别与外力作用下的主拉、压应力方向一致。本文引入单元位移场线性假定及斜压场理论计算弹簧内力,根据变形协调条件由单元结点位移计算弹簧变形,由弹簧刚度及倾角推导了该宏模型单元刚度矩阵,迭代计算使结构内力及位移逼近真值。算例分析表明,该模型能较好地反映剪力墙的受力性能。
|
| 关 键 词： | 剪力墙 转动弹簧宏模型 非线性 |
| 文章编号： | 1000-1301（2007）02-0074-07 |
| 修稿时间： | 2006-06-282006-09-26 |
Macro-modeling of rotational spring simulating behavior of RC wall |
| |
| PI Tianxing,FU Jianping,LI Yingmin.Macro-modeling of rotational spring simulating behavior of RC wall[J].Earthquake Engineering and Engineering Vibration,2007,27(2):74-80. |
| |
| Authors: | PI Tianxing FU Jianping LI Yingmin |
| |
| Institution: | Civil Engineering College, Chongqing University, Chongqing 400044, China |
| |
| Abstract: | A shear wall is divided into several six-node rectangular members according to the requirement of precision.Each member is composed of two oblique placed orthogonal springs and horizontal top and bottom rigid rods connected by springs.The direction of springs is in accordance with the main tension and compression stress when an external force is acting on the shear wall.The paper introduces the hypothesis of member linear displacement and modifying compression theory when calculating the internal force of springs.The deformation are computed on the basis of the node displacements according to the deformation harmony conditions and the stiffness matrix of the members is derived from the stiffness and angle of springs.The true value of internal force and displacement is gradually approximated by iterative calculation.It is shown that the model can well exhibit the behavior of shear wall when it is applied by forces. |
| |
| Keywords: | Shear wall modeling of rotational spring nonlinear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
