| 电沉积参数对Cr2O3超疏水膜层表面形貌和润湿性的影响 |
| |
| 引用本文： | 金巍,梁建,马艳丽,张波,张世鹏.电沉积参数对Cr2O3超疏水膜层表面形貌和润湿性的影响[J].盐湖研究,2022,30(1):77-86. |
| |
| 作者姓名： | 金巍 梁建 马艳丽 张波 张世鹏 |
| |
| 作者单位： | 中国科学院青海盐湖研究所,中国科学院盐湖资源综合高效利用重点实验室,青海 西宁 810008;青海省盐湖资源化学重点实验室,青海 西宁 810008;中国科学院青海盐湖研究所,中国科学院盐湖资源综合高效利用重点实验室,青海 西宁 810008;青海盐湖资源综合利用技术研究开发中心,青海 西宁 810008;多巴镇中心学校,青海 西宁 811601;中国科学院青海盐湖研究所,中国科学院盐湖资源综合高效利用重点实验室,青海 西宁 810008;青海省盐湖资源化学重点实验室,青海 西宁 810008;中国科学院大学,北京 100049 |
| |
| 基金项目： | 青海省科技厅青年自然基金项目“基于电沉积和表面修饰的氢氧化镁超疏水材料可控构筑与性能研究”(2019-ZJ-946Q) |
| |
| 摘 要： | 采用电沉积法在碳钢片表面制备Cr2O3微纳膜层,并用硬脂酸对其进行表面修饰,降低其表面能。通过单因素法依次优化电流密度、铬酸浓度、极间距和电沉积时间,分析所得Cr2O3超疏水膜层的表面形貌和润湿性。当电流强度为4A、铬酸浓度为1.5 mol/L、极间距为5 mm及电沉积时间为1 h时,经硬脂酸修饰后Cr2O3膜层的超疏水性能优异,其静态接触角达到153.52°,且滚动角为2.17°。
|
| 关 键 词： | 电沉积 硬脂酸修饰 超疏水 接触角 滚动角 |
| 收稿时间： | 2021/3/15 0:00:00 |
| 修稿时间： | 2021/7/12 0:00:00 |
Influence of Electrodeposition Conditions on the Surface Morphology and Wettability of Cr2O3 Super-hydrophobic Layer |
| |
| JIN Wei,LIANG Jian,MA Yan-li,ZHANG Bo,ZHANG Shi-peng.Influence of Electrodeposition Conditions on the Surface Morphology and Wettability of Cr2O3 Super-hydrophobic Layer[J].Journal of Salt Lake Research,2022,30(1):77-86. |
| |
| Authors: | JIN Wei LIANG Jian MA Yan-li ZHANG Bo ZHANG Shi-peng |
| |
| Institution: | (Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources,Qinghai Institute of Salt Lakes,Chinese Academy of Sciences,Xining,810008,China;Key Laboratory of Salt Lake Resources Chemistry of Qinghai Province,Xining,810008,China;Qinghai Technology Research and Development Center of Comprehensive Utilization of Salt Lakes Resources,Xining,810008,China;University of Chinese Academy of Sciences,Beijing 100049,China;Duoba Town Central School,Xining,811601,China) |
| |
| Abstract: | The micro/nano film of Cr2O3 was prepared on the surface of carbon steel sheet by electrodeposition method,then its surface energy was reduced by surface modification with stearic acid.The current density,chromic acid concentration,electrode spacing and the time of electrodeposition were optimized by single factor method,while the surface morphology and wettability of the obtained superhydrophobic films were analyzed.When the current intensity is 4A,the concentration of chromic acid 1.5 mol/L,the electrode spacing 5 mm and the electrodeposition time 1 h,the superhydrophobic performance of the Cr2O3 films modified by stearic acid is excellent while the static contact angle reaches 153.52° and the rolling angle is 2.17°. |
| |
| Keywords: | Electrodeposition Modified by stearic acid Superhydrophobic Static contact angle Rolling angle |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《盐湖研究》浏览原始摘要信息 |
| 点击此处可从《盐湖研究》下载免费的PDF全文 |
|
