Abstract: | Directional variability of spatial correlation is observed in natural soils due to their depositional characteristics and it influences the response of structures founded on these deposits. Nonetheless, the results presented in most of the available literature are based on the assumption of either isotropic spatial correlation or perfect spatial correlation of soil properties in horizontal and vertical directions. It is also observed from past studies that the effect of transformation model on the total uncertainty is quite significant. Hence, an effort has been made in this paper to study the effect of anisotropy of autocorrelation characteristics of cone tip resistance (qc) and the transformation model on the bearing capacity of a shallow strip footing, founding on the surface of a spatially varying soil mass. The statistics in the vertical direction of the soil mass are taken from 8 Cone Penetration Test (CPT) records and statistics in the horizontal direction are assumed. For the case considered, it is observed that the transformation model significantly influences the degree of variability of design parameter. The results also show that isotropic correlation structure based on the vertical autocorrelation distance underestimates the variability of design parameter. On the other hand, perfect correlation in horizontal or vertical, or both directions, overestimates the variability of design parameters, and produces conservative estimates of allowable bearing capacity. |