Ten Years of Development of Equipment for Measurement of Atmospheric Radioactive Xenon for the Verification of the CTBT |
| |
| Authors: | Matthias Auer Timo Kumberg Hartmut Sartorius Bernd Wernsperger Clemens Schlosser |
| |
| Institution: | 1. Federal Office for Radiation Protection, Rosastr. 9, 79098, Freiburg, Germany
2. Provisional Technical Secretariat of the Comprehensive Nuclear-Test-Ban Treaty Organization, 1400, Vienna, Austria
|
| |
| Abstract: | Atmospheric measurement of radioactive xenon isotopes (radioxenon) plays a key role in remote monitoring of nuclear explosions, since it has a high capability to capture radioactive debris for a wide range of explosion scenarios. It is therefore a powerful tool in providing evidence for nuclear testing, and is one of the key components of the verification regime of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The reliability of this method is largely based on a well-developed measurement technology. In the 1990s, with the prospect of the build-up of a monitoring network for the CTBT, new development of radioxenon equipment started. This article summarizes the physical and technical principles upon which the radioxenon technology is based and the advances the technology has undergone during the last 10 years. In contrast to previously used equipment, which was manually operated, the new generation of radioxenon monitoring equipment is designed for automated and continuous operation in remote field locations. Also the analytical capabilities of the equipment were strongly enhanced. Minimum detectable concentrations of the recently developed systems are well below 1 mBq/m3 for the key nuclide 133Xe for sampling periods between 8 and 24 h. All the systems described here are also able to separately measure with low detection limits the radioxenon isotopes 131mXe, 133mXe and 135Xe, which are also relevant for the detection of nuclear tests. The equipment has been extensively tested during recent years by operation in a laboratory environment and in field locations, by performing comparison measurements with laboratory type equipment and by parallel operation. These tests demonstrate that the equipment has reached a sufficiently high technical standard for deployment in the global CTBT verification regime. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
