| 基于FME的DWG数据到ArcGIS转换的应用研究 |
| |
| 引用本文： | 杨帆,薄成.基于FME的DWG数据到ArcGIS转换的应用研究[J].测绘科学,2012(2):143-145. |
| |
| 作者姓名： | 杨帆 薄成 |
| |
| 作者单位： | 辽宁工程技术大学测绘与地理科学学院 |
| |
| 基金项目： | 中国矿业大学(北京)煤炭资源与安全开采国家重点实验室开放课题(2007-09);辽宁“百千万人才工程”培养经费资助项目(2010921099);对地观测技术国家测绘地理信息局重点实验室经费资助项目(K201106) |
| |
| 摘 要： | 本文针对工程实践中DWG数据到ArcGIS转换的实际需要,基于转换工具FME,采用FME Workbench构建转换模块对DWG数据转换的方法,研究了利用FME Workbench构建转换模块的关键技术和对转换后GIS数据的检查。通过以阜新腰梅力板的DWG数据为例,实现了对DWG数据到ArcGIS的Geodatabase数据的转换,并对转换后的数据进行检查、整理。结果证明,本文所采用的转换方法良好,节省了工作时间、提高了工作效率。
|
| 关 键 词： | GIS FME 转换模块 DWG数据转换 |
Application of translation from DWG data to ArcGIS based on FME |
| |
| YANG Fan,BO Cheng.Application of translation from DWG data to ArcGIS based on FME[J].Science of Surveying and Mapping,2012(2):143-145. |
| |
| Authors: | YANG Fan BO Cheng |
| |
| Institution: | (Liaoning Technology University,School of Geomatics,Liaoning Fuxin 123000,China) |
| |
| Abstract: | The arcticle aimed at the need of thanslation from DWG data to ArcGIS in engineering practice,studying DWG data and GIS data and using the translation tool-FME,adopted the method of DWG data translation by constructing conversion module with FME Workbench,discussed the key technology of constructing conversion module with FME Workbench and checked the GIS data after translation.Taking DWG data of YAO Meiliban in Fuxin as example,it realized translation from DWG data to Geodatabase data in ArcGIS and checking,classifying the translated data.The results showed that it is good that translation based on the method mentioned in the article,saved work time and improved work efficency. |
| |
| Keywords: | GIS FME conversion module DWG data translation |
| 本文献已被 CNKI 等数据库收录！ |
|
