Prediction of the Cut Depth of Granitic Rocks Machined by Abrasive Waterjet (AWJ) |
| |
| Authors: | Gokhan Aydin Izzet Karakurt Kerim Aydiner |
| |
| Institution: | 1. Department of Mining Engineering, Karadeniz Technical University, 61080, Trabzon, Turkey
|
| |
| Abstract: | In this paper, an experimental study on the cut depth, which is an important cutting performance indicator in the abrasive waterjet (AWJ) cutting of rock, was presented. Taguchi experimental design of an orthogonal array was employed to conduct the experiments. A variety of nine types of granitic rocks were used in the cutting experiments. The experimental data were used to assess the influence of AWJ operating variables on the cut depth. Using regression analysis, models for prediction of the cut depth from the operating variables and rock properties in AWJ machining of granitic rocks were then developed and verified. The results indicated that the cut depths decreased with increasing traverse speed and decreasing abrasive size. On the other hand, increase of the abrasive mass flow rate and water pressure led to increases in the cut depths. Additionally, it was observed that the standoff distance had no discernible effects on the cut depths. Furthermore, from the statistical analysis, it was found that the predictive models developed for the rock types had potential for practical applications. Verification of the models for using them as a practical guideline revealed a high applicability of the models within the experimental range used. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
