Borehole failure analysis in a sandstone under anisotropic stresses |
| |
| Authors: | Euripides Papamichos |
| |
| Institution: | Department of Civil Engineering, Aristotle University of Thessaloniki, GR‐54124 Thessaloniki, Greece |
| |
| Abstract: | Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd. |
| |
| Keywords: | borehole failure anisotropic stress size effect numerical analysis Cosserat elastoplas‐ticity Red Wildmoor sandstone |
|
|
