Modeling of an MTBE plume at Pascoag, Rhode Island |
| |
| Authors: | A Myrttinen T Boving and O Kolditz |
| |
| Institution: | (1) Center of Applied Geosciences, University of Tübingen, Tübingen, Germany;(2) Department of Geosciences, University of Rhode Island, Kingston, USA;(3) Department of Environmental Informatics, Helmholtz Centre for Environmental Research, UFZ, Leipzig, Germany |
| |
| Abstract: | A numerical groundwater flow and mass transport model was developed to predict the extent of impact from methyl tertiary butyl
ether (MTBE) release on a down-gradient drinking water well field. An MTBE incident in Pascoag, Rhode Island, was used as
a case study and the plume’s past and future development was simulated using scenario analysis. The numerical code used was
GeoSys/Rockflow, which permits a coupled flow and transport simulation as one object, thus alleviating the need for simulating
the MTBE fate with separate flow and transport codes. The numerical model was built on available hydrogeological and chemical
data as well as on GIS information of the site. By comparing the simulated results with observed field data, it was found
that the model could provide reliable results even when the simulated aquifer was simplified to a two-dimensional flow and
transport domain. Finally, the calibrated model was used for exploring a location that may be suitable for a new well field.
Despite the model limitations associated with uncertainties of data and simplifying assumptions, numerical modeling of this
MTBE contaminated site proved a useful tool and provided guidance for future municipal well field operation strategies and
aquifer remediation alternatives. |
| |
| Keywords: | MTBE Groundwater flow Mass transport Numerical modeling Plume development |
| 本文献已被 SpringerLink 等数据库收录！ |
|
