Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area |
| |
作者姓名: | TAO Chuanqi WANG Yanbin LI Yong NI Xiaoming GAO Xiangdong |
| |
作者单位: | School of Mining Engineering;Liaoning Key Lab of Petro-chemical Special Building Materials;College of Geoscience and Surveying Engineering;School of Energy Science and Engineering;School of Earth Science.East China University of Technology |
| |
基金项目: | the National Great Science&Technology Specific Project(2016ZX05066001-002);National Science Foundation for Young Scientists of China(Grant No.41702171);Program for Excellent Talents in Beijing(2017000020124G107);Liao Ning Revitalization Talents Program grant number [XLYC1807129]. |
| |
摘 要: | The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.
|
关 键 词: | coalbed METHANE PRESSURE and temperature energy NANOPOROSITY ORDOS BASIN |
收稿时间: | 2018/11/7 0:00:00 |
修稿时间: | 2019/4/17 0:00:00 |
Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing‐Shenfu Area |
| |
Authors: | TAO Chuanqi WANG Yanbin LI Yong NI Xiaoming GAO Xiangdong |
| |
Institution: | 1 School of Mining Engineering, Liaoning Shihua University, Fushun 113001, Liaoning, China
2 Liaoning Key Lab of Petro-chemical Special Building Materials, Fushun 113001, Liaoning, China;3 College of Geoscience and Surveying Engineering, China University of Mining and Technology, Beijing 100083, China;4 School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, Shangdong, China; 5 School of Earth Science, East China University of Technology, Nanchang, Jiangxi 30013, China |
| |
Abstract: | The majority of coalbed methane (CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high‐temperature and high‐pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under high‐temperature and high‐pressure conditions, low‐temperature liquid nitrogen adsorption‐desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance (Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7–100 nm, the peak volume of pores with diameters 10–100 nm is higher than that from pores with diameters 1.7–10 nm, especially for pores with diameters of 40–60 nm, indicating that pores with diameters of 10–100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2–3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489–1.083 nm, the pore size distribution is bimodal, with peak values at 0.56–0.62 nm and 0.82–0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules. |
| |
Keywords: | coalbed methane pressure and temperature energy nanoporosity Ordos Basin |
本文献已被 CNKI 维普 等数据库收录! |
| 点击此处可从《Acta Geologica Sinica》浏览原始摘要信息 |
| 点击此处可从《Acta Geologica Sinica》下载免费的PDF全文 |
|