| 一种刻槽式随钻声波测井隔声体的理论与实验研究 |
| |
| 引用本文： | 苏远大,庄春喜,唐晓明,黑创,许松,李振,杨喜龙.一种刻槽式随钻声波测井隔声体的理论与实验研究[J].地球物理学报,2016,59(12):4521-4528. |
| |
| 作者姓名： | 苏远大 庄春喜 唐晓明 黑创 许松 李振 杨喜龙 |
| |
| 作者单位： | 中国石油大学(华东)地球科学与技术学院, 青岛 266580 |
| |
| 基金项目： | 国家自然科学基金（41474092，41604109）资助. |
| |
| 摘 要： | 隔声体的设计与效果评价对随钻声波测井仪器的研发至关重要.针对刻槽式隔声体结构,利用数值模拟的方法分析了钻铤波在其传播过程中隔声阻带形成、拓宽并达到稳定的物理过程.在此基础上优化设计并加工了一种可用于随钻声波测井实验样机的刻槽式隔声体.在实验室内利用声波频率扫描方法测量了该隔声体的钻铤波声衰减,并进一步在实验井中测试验证了隔声体在井孔中工作时的隔声效果.最后,开展了随钻测井环境下的现场实验,测到了高质量的地层波信号和对应的纵波时差.理论分析和实验对比研究结果表明,刻槽隔声体有效地降低了钻铤直达波的干扰.本文的工作为随钻声波测井刻槽式隔声体的设计及评价测试提供了一套系统的理论及实验方法.
|
| 关 键 词： | 随钻声波测井 隔声体 钻铤波 阻带 刻槽 |
| 收稿时间： | 2016-03-18 |
Theoretical and experimentation of a carved collar isolator for logging-while-drilling acoustic tool |
| |
| SU Yuan-Da,ZHUANG Chun-Xi,TANG Xiao-Ming,HEI Chuang,XU Song,LI Zhen,YANG Xi-Long.Theoretical and experimentation of a carved collar isolator for logging-while-drilling acoustic tool[J].Chinese Journal of Geophysics,2016,59(12):4521-4528. |
| |
| Authors: | SU Yuan-Da ZHUANG Chun-Xi TANG Xiao-Ming HEI Chuang XU Song LI Zhen YANG Xi-Long |
| |
| Institution: | School of Geosciences, China University of Petroleum, Qingdao 266580, China |
| |
| Abstract: | The design of logging-while-drilling (LWD) isolator is crucial for suppressing tool waves propagating along the drill collar under LWD conditions. This study simulates and analyses the physical process of stopband forming, evolution, and stabilization of a carved collar. Based on the simulation results, we have designed and manufactured an optimal LWD prototype isolator. We measured the collar wave attenuation of the carved isolator using the frequency-sweep technique, and tested the performance of the isolator in two experimental wells in the laboratory condition. Finally, we did a field test of the tool in the LWD environment which shows that formation acoustic signals with good quality and high SNR are measured in the designated isolation stopband. The theoretical and experimental results indicate the cutting groove isolator in this study can effectively suppress the drill collar wave which provide a standard method for the design and evaluation of an LWD acoustic isolator on a carved drill collar. |
| |
| Keywords: | Acoustic logging-while-drilling Isolator Collar wave Stopband Grooved collar |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《地球物理学报》浏览原始摘要信息 |
| 点击此处可从《地球物理学报》下载免费的PDF全文 |
|
