| Abstract: | The effect of topography and subsurface inhomogeneity on surface motion is investigated in the case of Rayleigh waves. In the previous paper, the same effect was investigated in the case of SV waves. Several types of topography, such as cliffs both with and without a soft layer at the foot of the slope, are considered. Computations are made using a new hybrid method combining a particle model with a finite element method. In cases of harmonic Rayleigh waves, surface motions with amplitudes as large as 1.5 to 5 times the horizontal surface displacement of the incident Rayleigh waves are produced near the slope and the sloping interface. When a Rayleigh wave propagating through a hard single-layered ground encounters a sloping interface where hard ground and soft ground make contact with each other, Rayleigh waves having two different, phase velocities are produced and they correspond to the fundamental mode, and the first mode determined by Haskell's method. In addition, the transient response when Rayleigh waves propagate through the cliff is also simulated. Assuming the vertical component of the Tokachi-oki Earthquake (1968) measured on the surface to be a Rayleigh wave, the incident Rayleigh wave can be obtained by a Fourier synthesis of eigenfunctions of Rayleigh waves. |
