Improving integrity of RC beam-column joints with deficient beam rebar anchorage |
| |
| Authors: | Syafri Wardi Yasushi Sanada Nandita Saha Susumu Takahashi |
| |
| Institution: | 1. Graduate School of Engineering, Osaka University, Osaka, Japan;2. Faculty of Engineering, Daido University, Nagoya, Japan |
| |
| Abstract: | In recent earthquakes in developing countries, severe damage was observed on reinforced concrete buildings. This study focuses on exterior beam-column joints with substandard beam rebar anchorage and seismic strengthening by installing wing walls. First, a series of experiments was conducted to investigate the seismic behavior of exterior joints with substandard beam rebar anchorage representing typical Bangladeshi buildings. Two 0.7-scaled exterior joint specimens were tested, and these specimens showed beam rebar anchorage failure and/or joint shear failure. Prior to strengthening of the joint, a series of pullout tests was conducted on postinstalled bonded anchors in low-strength concrete for strengthening design. Then, an experiment was performed to apply the strengthening method by wing walls to one of the exterior joint specimens to improve the integrity, and this method was intended to prevent the failure of beam rebar anchorage. The strengthening method is proposed to extend the development length of beam longitudinal bars by considering the embedment length along the wing walls. The test results verified the effectiveness and applicability of the proposed strengthening method to upgrade exterior RC beam-column joints with deficient beam rebar anchorage. |
| |
| Keywords: | anchorage failure developing country low-strength concrete reinforced concrete seismic strengthening substandard structure |
|
|
