首页 | 本学科首页   官方微博 | 高级检索  
     检索      


EXPERIMENTAL STUDY ON THE CHANGES OF ULTRASONIC CODA WAVE AND ACOUSTIC EMISSION DURING ROCK LOADING AND DEFORMATION
Authors:YANG Hai-ming  CHEN Shun-yun  LIU Pei-xun  GUO Yan-shuang  ZHUO Yan-qun  QI Wen-bo
Institution:State Key Laboratory of Earthquake Dynamics, Institute of Geology,China Earthquake Administration, Beijing 100029, China
Abstract:The coda wave propagation path has received extensive attention as it is more sensitive to small changes in the medium than the direct wave. During the process of loading, the wave velocity, medium or source changes may cause the coda wave to change. The physical mechanism of change in the ultrasonic coda wave varies during different deformation stages. Meanwhile, there exist local damages in the rock sample during the deformation, and it will be accompanied by acoustic emission. Combining the ultrasonic coda wave and acoustic emission is beneficial to characterize the coda wave characteristics and damage degree of the sample at different deformation stages. In this paper, three kinds of rocks, including granodiorite, marble and sandstone with the sizes of 50mm×50mm×150mm, are used to carry out observations of ultrasonic coda wave and acoustic emission during the whole process of loading so as to study characteristics of the coda wave at different deformation stages. The major results are given below: 1)There is a good correspondence between the coda wave variation and the acoustic emission evolution process. When the acoustic emission frequency increases, the coda wave changes accordingly. In particular, the coda wave changes in the early stages of increased acoustic emission frequency, which indicates that the early damage information of rock can be obtained by analysis of the coda wave. 2)The physical mechanism of the coda wave change is different in different deformation stages. At the initial stage of loading, there are obvious scatterer changes in the coda wave change; then, in the linear elastic deformation stage, the wave velocity change is dominating; in the late-stage of loading, the scatterer change increases and coexists with the wave velocity change, the scatterer change effect is related with the rock micro-fracture degree, the rock will locally be damaged before rupturing, and the role of the scatterer will be enhanced. 3)With the increase of loading, the amplitude of increase of the wave velocity generally decreases gradually, which is basically consistent with the understanding obtained through the direct wave. The interference of acoustic emission can be eliminated because of the Kaiser effect when analyzing the coda wave. The consistency of the wave velocity change and stress loading and unloading is further verified. 4)The micro-fracture generated during rock deformation will change the physical mechanism of the coda wave change, and the scatterer effect will be significantly enhanced. At the same time, the acoustic emission waveform will cause interference to the ultrasonic coda wave. This means that attention needs to be paid when analyzing rock damage using only coda wave data. In short, the ultrasonic coda wave and acoustic emission can reflect the damage inside the rock, and the change mechanism of the coda wave in different deformation stages is different. The joint observation of the two can play a mutual verification role, which is conducive to improving the reliability of the observation results.
Keywords:ultrasonic coda wave  acoustic emission  rock experiment  wave velocity variation  scattering change  
点击此处可从《地震地质》浏览原始摘要信息
点击此处可从《地震地质》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号