首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于OpenSees的空心钢管混凝土柱恢复力计算公式研究
引用本文:卢德辉,王宏伟,周云.基于OpenSees的空心钢管混凝土柱恢复力计算公式研究[J].地震学刊,2014(5):626-631.
作者姓名:卢德辉  王宏伟  周云
作者单位:广州大学土木工程学院,广州510006
基金项目:广东省自然科学基金博士启动项目(10451009101006260); 国家自然科学基金青年项目(51108106)资助
摘    要:采用OpenSees建立基于纤维截面的空心钢管混凝土柱有限元模型,对空心钢管混凝土柱的滞回性能进行计算。在该有限元模型基础上,考虑轴压比、长细比、截面空心率、截面含钢率、混凝土强度和钢材强度等因数对骨架曲线恢复力模型的影响,结合正交试验设计方法,对骨架曲线恢复力计算公式进行回归分析。研究结果表明:1数值计算结果与试验结果吻合良好;2得到的空心钢管混凝土柱骨架曲线恢复力计算公式在一定设计参数范围内具有较高的计算精度。

关 键 词:空心钢管混凝土  恢复力模型  纤维模型  OpenSees

Research on Resilience Formula of Hollow Concrete-filled Steel Tube Based on OpenSees
LU De-Hui,WANG Hong-Wei,ZHOU Yun.Research on Resilience Formula of Hollow Concrete-filled Steel Tube Based on OpenSees[J].Journal of Seismology,2014(5):626-631.
Authors:LU De-Hui  WANG Hong-Wei  ZHOU Yun
Institution:(Department of Civil Engineering, Guangzhou University, Guangzhou 510006, China)
Abstract:The software OpenSees was adopted in this paper to build finite element models for hollow concrete filled steel tubular( H-CFST). The influence of several factors,such as axial compression ratio,slenderness ratio,hollow ratio,steel ratio,concrete strength and steel strength,on resilience model of skeleton curve was discussed. Then,the resilience formula was regressively analyzed using the combination orthogonal design method. The results indicate that 1) the numerical calculation conclusions well fit the test and 2) the resilience formula for H-CFST is possessed of reliable precision in certain range of design parameters.
Keywords:hollow concrete filled steel tubular  resilience model  fiber model  OpenSees
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号