Improved design of special boundary elements for T-shaped reinforced concrete walls |
| |
Authors: | Xiaodong Ji Dan Liu Jiaru Qian |
| |
Institution: | 1.Department of Civil Engineering, Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry,Tsinghua University,Beijing,China |
| |
Abstract: | This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design method. Comparison of the design provisions of the GB 50011-2010 code and those of the American code ACI 318-14 indicates a possible deficiency in the T-shaped wall design provisions in GB 50011-2010. A case study of a typical T-shaped wall designed in accordance with GB 50011-2010 also indicates the insufficient extent of the boundary element at the non-flange end and overly conservative design of the flange end boundary element. Improved designs for special boundary elements of T-shaped walls are developed using a displacement-based method. The proposed design formulas produce a longer boundary element at the non-flange end and a shorter boundary element at the flange end, relative to those of the GB 50011-2010 provisions. Extensive numerical analysis indicates that T-shaped walls designed using the proposed formulas develop inelastic drift of 0.01 for both cases of the flange in compression and in tension. |
| |
Keywords: | |
本文献已被 CNKI SpringerLink 等数据库收录! |