Assessment of liquefaction potential based on peak ground motion parameters |
| |
| Authors: | Rolando P Orense |
| |
| Institution: | Chuo Kaihatsu Corporation, 3-13-5 Nishi-Waseda, Shinjuku-ku, Tokyo 169-8612, Japan |
| |
| Abstract: | Conventionally, evaluation of liquefaction potential of loose saturated cohesionless deposits as specified in Japanese design codes employs peak ground acceleration (PGA). However, recent large-scale earthquakes in Japan revealed that liquefaction at some sites did not occur even though large PGAs were recorded at or near these sites. As an alternative approach, an evaluation procedure based on peak ground motion parameters, i.e. incorporating both PGA and the peak ground velocity (PGV), is proposed. By performing parametric studies using one-dimensional seismic response analysis and formulating regression models, seismic-induced shear stresses within the deposit are expressed in terms of peak ground motion parameters at the surface, and these are used to calculate the factor of safety against liquefaction. Application to case histories in Japan indicates that the proposed two-parameter equation can adequately account for the occurrence and non-occurrence of liquefaction at various sites as compared to the conventional PGA-based approach. Moreover, analyses of several strong motion records at various sites show that liquefaction may occur when PGA≥150 gal and PGV≥20 kine, indicating that these values can serve as thresholds in assessing the possible occurrence of liquefaction. |
| |
| Keywords: | Liquefaction Earthquake Acceleration Velocity Seismic response |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
