A framework for predicting abrasion rupture of crusts in wind erosion |
| |
| Authors: | Seyed Mohammad Fattahi Abbas Soroush Ning Huang Jie Zhang Sona Jodari Abbasi Yang Yu |
| |
| Institution: | 1. Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran;2. Department of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu Province, China;3. Department of Civil Engineering, University of Tabriz, Tabriz, Iran |
| |
| Abstract: | Crusts play a crucial role in the reduction or control of wind erosion. In this regard, the resilience and durability of crusts are of prime importance. Crusts have high resilience and durability against wind flow shear stresses; however, they are prone to abrasion induced by saltating particles. Therefore, estimating crust durability in abrasion rupture has practical importance. In this study, a cyanocrust and a biocemented sand crust were subjected to a controlled flux of saltating particles for different sandblasting periods to provide a framework for predicting crust rupture. The velocity and pre- and post-collision energy of the saltating particles were measured using high-speed photography. The changes in the strength of the crusts after different periods of sandblasting were determined using a scratch test. The results suggested that the average strength of the cyanocrust and biocemented sand crust became 0.25 and 0.7 of their corresponding initial values after 30 min of sandblasting. Also, the average stiffness of the cyanocrust and biocemented sand crust decreased to 0.5 and 0.9 of their initial values, respectively. Furthermore, the amount of impact energy absorbed by the crusts increased by the deterioration of the crusts. Compiling the results of the wind tunnel experiment and scratch tests yielded an exponential equation which can be used to estimate crust durability in a given condition of saltation. Based on this equation, the cyanocrust and biocemented sand crust will break down entirely after 23 and 449 min, respectively, at a wind velocity of 6.8 m/s and a saltation flux of 1 g/s/m. |
| |
| Keywords: | abrasion durability high-speed photography saltation scratch test wind erosion |
|
|
