Laboratory and theoretical evaluation of impact of packing density,particle shape,and uniformity coefficient on erodibility of coarse-grained soil particles |
| |
| Authors: | Hyunwook Choo Qian Zhao Susan E Burns Terry W Sturm Seung Ho Hong |
| |
| Institution: | 1. Department of Civil Engineering, Kyung Hee University, Yongin, 17104 South Korea;2. Golder Associates Inc., 5170 Peachtree Rd. Building 100, Suite 300, Atlanta, GA, 30341 USA;3. School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, 30332-0355 USA;4. Department of Civil & Environmental Engineering, West Virginia University, Morgantown, WV, 26508 USA |
| |
| Abstract: | Sedimentation – including erosion, transport, and deposition of coarse-grained particles – is a primary and growing environmental, engineering, and agricultural issue around the world. Soil erosion occurs when the hydrodynamic force induced by flowing water exceeds the geotechnical resistance of soils, as measured by critical shear stress for initiation of soil-particle motion. Even though various quantitative methods have been suggested with respect to different types of soil, the most widely accepted formula to estimate critical shear stress for coarse-grained soil is a direct function of the median grain size of the soil particles; however, the erosion resistance of soils also varies with other geotechnical properties, such as packing density, particle shape, and uniformity coefficient. Thus, in this study, a combined rolling–lift model for particle detachment was derived based on theoretical analysis. A series of experimental flume tests were conducted with specimens prepared with standard soil types, as well as laboratory-prepared mixtures of coarse-grained soil to validate the theoretical model and determine the effect of other geotechnical properties on the erosion characteristics of coarse grains, coupled with the effect of median particle size. The results indicated that the median grain size is the primary variable determining the resistance of coarse grains, but the critical shear stress also varies with the packing density of the soil matrix. In addition, angular particles show more erosion resistance than rounded particles, and the erosion potential of a soil decreased when the grain is well graded (higher value of uniformity coefficient). Additionally, regression analysis was performed to quantify the effect of each parameter on the critical shear stress of coarse grains. © 2020 John Wiley & Sons, Ltd. |
| |
| Keywords: | critical shear stress erodibility coarse grains median grain size packing density particle shape uniformity coefficient |
|
|
