首页 | 本学科首页   官方微博 | 高级检索  
     检索      

微物理过程分档处理的三维对流云模式研究
引用本文:刘晓莉,牛生杰.微物理过程分档处理的三维对流云模式研究[J].南京气象学院学报,2007,30(5):617-622.
作者姓名:刘晓莉  牛生杰
作者单位:南京信息工程大学,大气物理与大气环境重点实验室,江苏,南京,210044
基金项目:国家自然科学基金 , 江苏省重点实验室基金
摘    要:在三维完全弹性冰雹云参数化模式动力框架和二维面对称分档模式(微物理过程分档处理)的基础上,建立粒子全分档的三维对流云分档模式.利用建立的分档模式对2000年6月29日美国堪萨斯州的一次超级单体风暴进行了模拟,并将模拟结果与三维冰雹云参数化模式的模拟结果作了对比.结果表明:分档模式可以较好地模拟出强对流云中两支上升气流,模拟得到的最大上升气流速度大于参数化模式;分档模式模拟得到的雷达回波强度、顶高和回波宽度更接近实测.

关 键 词:微物理过程分档  三维对流云模式  数值模拟  微物理过程  分档模式  处理  三维  强对流云  模式研究  Based  Cloud  Model  Convective  宽度  雷达回波强度  模式模拟  云参数化  气流速度  上升气流  模拟结果  风暴  超级单体  堪萨斯  美国
文章编号:1000-2022(2007)05-0617-06
修稿时间:2007-05-09

Development of 3-D Convective Cloud Model Based on Spectral Bin Microphysics
LIU Xiao-li,NIU Sheng-jie.Development of 3-D Convective Cloud Model Based on Spectral Bin Microphysics[J].Journal of Nanjing Institute of Meteorology,2007,30(5):617-622.
Authors:LIU Xiao-li  NIU Sheng-jie
Institution:Key Laboratory of Atmospheric Physics and Atmospheric Environment,NUIST,Nanjing 210044,China
Abstract:A 3-D convective cloud SBM model has been developed on the basis of the IAP 3-D hailstorm numerical model and the 2-D slab-symmetric model with spectral bin microphysics(SBM),and the real supercell storm case occurred on 29 June 2000 in Kansas simulated.Simulation results with the 3-D convective cloud SBM model are compared with those with the IAP 3-D hailstorm numerical model,which indicates that the updraft velocity obtained from the SBM model depicts the two observed updrafts well;and the strength,height,and width of radar echo simulated by the SBM model are closer to the observations than the IAP 3-D hailstorm numerical model.
Keywords:spectral bin microphysics  3-D convective cloud model  numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号