|
|||||
|
|
Design pressure distributions on the hull of the FLOW wave energy converter |
|
| Authors: | Nuno Fonseca João Pessoa Tiago Morais |
| Institution: | a Centre for Marine Technology and Engineering (CENTEC), Technical University of Lisbon, Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal b Martifer Energia S.A., Zona Industrial - Apartado 17, 3684-001 Oliveira de Frades, Viseu, Portugal |
| Abstract: | This paper presents a procedure to calculate the design pressure distributions on the hull of a wave energy converter (WEC). Design pressures are the maximum pressure values that the device is expected to experience during its operational life time. The procedure is applied to the prototype under development by Martifer Energy (FLOW—Future Life in Ocean Waves).A boundary integral method is used to solve the hydrodynamic problem. The hydrodynamic pressures are combined with the hydrostatic ones and the internal pressures of the large ballast tanks. The first step consists of validating the numerical results of motions by comparison with measured experimental data obtained with a scaled model of the WEC. The numerical model is tuned by adjusting the damping of the device rotational motions and the equivalent damping and stiffness of the power take-off system. The pressure distributions are calculated for all irregular sea states representative of the Portuguese Pilot Zone where the prototype will be installed and a long term distribution method is used to calculate the expected maximum pressures on the hull corresponding to the 100-year return period. |
| Keywords: | Wave energy converter Hydrodynamic pressure Panel method Exceedance probability Long term distribution Design pressure |
| 本文献已被 ScienceDirect 等数据库收录！ | |