Forced vibration analysis of an offshore tower carrying an eccentric tip mass with rotary inertia due to support excitation |
| |
| Authors: | Jong-Shyong Wu Chin-Tzu Chen |
| |
| Institution: | aDepartment of Naval Architecture and Marine Engineering, National Cheng-Kung University, Tainan, Taiwan 701, Republic of China |
| |
| Abstract: | Dynamic responses of structures due to earthquake excitation are the important problems in engineering, thus, the information concerned is plenty. However, most of the literature is relating to the discrete methods, particularly to the finite element method (FEM), and the one relating to the method combining both the “continuous” and “discrete” models is rare. The objective of this paper is to provide some information in this respect. First, the analytical solution for the natural frequencies and normal mode shapes of a “continuous” tower, without contacting water (or “dry” tower), carrying an eccentric tip mass possessing rotary inertia is determined. Next, the partial differential equation of motion for the forced vibration of the tower, contacting water (or “wet” tower), subjected to support excitation is transformed into a matrix equation by using the last natural frequencies and normal modes shape of the freely vibrating dry tower. Finally, the numerical integration method is used to solve the matrix equation to yield the seismic response of the wet tower. In theory, the mode superposition method is correct only if the total number of modes considered approaches infinity, however, numerical results of this paper reveal that superposition of only the lowest six modes will yield excellent results to be very close to the corresponding ones obtained from the conventional FEM. For this reason, the CPU time required by the presented approach is less than 5% of that required by the conventional FEM. |
| |
| Keywords: | Forced vibration Offshore tower Eccentric tip mass Rotary inertia Normal mode shapes Support excitation |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
