A time-domain method to evaluate the use of moving weights to reduce the roll motion of a ship |
| |
| Authors: | Thomas W TreakleIII Dean T Mook Stergios I Liapis Ali H Nayfeh |
| |
| Institution: | a Graduate Research Assistant, Virginia Polytechnic Institute and State University; Currently Research Engineer, Ship Technology Division, Scientific Applications International Corporation, 134 Holiday Court, Suite 318, Annapolis, MD 21403, USA;b Professor, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA;c Professor, Department of Aerospace and Ocean Engineering, VPI and SU; Currently Senior Research Engineer, Shell E and P, Houston, TX 77001, USA |
| |
| Abstract: | A method to evaluate the use of actively controlled moving weights on board ships to reduce roll motion is developed. The weights can simulate in principle anti-roll-tank systems, or they can be considered a possible anti-roll device in their own right. The ship, the moving weight, and the control device are considered components of a single dynamic system. The full eight-degree-of-freedom set of coupled governing equations for the complete dynamic system is derived. And a three-degree-of-freedom non-linear approximation for the roll motion only (MOTSIM) is derived from these eight equations. The reduced set of equations is used to determine the influence of various parameters and to evaluate control strategies. A PID controller is developed to command the position of the weight and a servomechanism model is used to predict its actual position. Then, the moving-weight system is incorporated into LAMP (Large–Amplitude–Motion Program), a computer code that integrates the governing equations of the sea and the motion of the ship interactively and simultaneously and predicts the motion of the ship in the time domain. A comparison of the results from the two simulations shows that there is fairly good correlation between the simple and complex models, but the simple model is a little optimistic in predicting the effectiveness of the moving-weight system. The results predict that the moving-weight system can be an excellent roll-suppressing device when the moving weight is as small as 1% of the displacement of the ship and the maximum distance the weight moves is as small as 15% of the half-beam. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
