首页 | 本学科首页   官方微博 | 高级检索  
     检索      

安全叠接管节点在低周循环载荷下的破坏模式研究
引用本文:秦飞 GHOWM 等.安全叠接管节点在低周循环载荷下的破坏模式研究[J].海洋工程,2002,20(1):29-35.
作者姓名:秦飞  GHOWM
作者单位:1. 北京工业大学,机电学院,北京,100022
2. ESG Engineering Pte Ltd Singapore
3. School of Civil and Structural Engineering,Nanyang Technological University,639798 Singapore
摘    要:采用实验和数值模拟方法研究了一种新型海洋平台管节点在地震载荷下的响应和破坏情况。采用拟静态循环加载模拟地震载荷 ,对真实尺寸的试件进行实验 ,研究局部屈曲和裂纹等对管接点抗震性能的影响。能量分析表明 ,发生在斜支管中的局部屈曲消耗了大部分输入能量。与现在使用的N型管节点相比 ,该新型管节点有较好的抗震性能。采用有限元数值模拟方法分析比较了不同尺寸配置下 ,该型管节点的响应曲线

关 键 词:管节点  抗震性能  非弹性大变形  循环载荷  有限元分析
文章编号:1005-9865(2002)01-0029-07
修稿时间:2001年5月15日

Failure analysis of offshore tubular joints under seismic loading
QIN Fei,GHO W M,FUNG T C,SOH C K.Failure analysis of offshore tubular joints under seismic loading[J].Ocean Engineering,2002,20(1):29-35.
Authors:QIN Fei  GHO W M  FUNG T C  SOH C K
Abstract:Failure mode and seismic behavior of an innovation offshore tubular joint, a completely overlapped joint or COJ, are investigated by use of experimental and numerical methods. With quasi-static cyclic loading to simulate earthquake, a full-scale COJ joint is tested in the Lab. The influence of local buckling and cracking on the failure of the joint is examined. Energy analysis indicates that the local inelastic buckling in the through brace dissipates most of the input energy. Comparison of N-joints shows that COJ has better seismic performance. A parametric study is carried out by using finite element method to investigate the influence of different geometry configurations on the hysteresis curves of the joints.
Keywords:offshore tubular joints  seismic performance  inelastic deformation  cyclic loading  finite element analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《海洋工程》浏览原始摘要信息
点击此处可从《海洋工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号