| KK型管节点应力集中系数几何敏感性分析 |
| |
| 引用本文： | 林海花,孙承猛,石强.KK型管节点应力集中系数几何敏感性分析[J].海洋工程,2020,38(6):142-150. |
| |
| 作者姓名： | 林海花 孙承猛 石强 |
| |
| 作者单位： | 山东交通学院 船舶与港口工程学院, 山东 威海 264200;大连船舶重工集团设计研究所有限公司, 辽宁 大连 116005 |
| |
| 基金项目： | 工信部项目——自升式钻井平台品牌工程（Ⅲ型）；国家自然科学青年基金（51909148）；山东交通学院博士科研启动基金资助（BS2018001）；山东交通学院“攀登计划”（SDJTUC1802）；山东交通学院校级基金（Z201813） |
| |
| 摘 要： | KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。
|
| 关 键 词： | 自升式平台 桁架式桩腿 KK型管节点 应力集中系数 几何敏感性 |
| 收稿时间： | 2019/12/9 0:00:00 |
Geometric sensitivity analysis of stress concentration factor of KK-type tube joints |
| |
| LIN Haihu,SUN Chengmeng,SHI Qiang.Geometric sensitivity analysis of stress concentration factor of KK-type tube joints[J].Ocean Engineering,2020,38(6):142-150. |
| |
| Authors: | LIN Haihu SUN Chengmeng SHI Qiang |
| |
| Institution: | Naval Architecture and Port Engineering College, Shandong Jiaotong University, Weihai 264200, China; Dalian Shipbuilding Industry Co., Ltd., Dalian 116005, China |
| |
| Abstract: | KK tubular joint is a kind of tubular joint in the truss leg of jack-up platform, and its stress concentration factor(SCF) is an important parameter affecting the fatigue life of the leg. SCF is closely related to the geometric form of tubular joints. In order to analyze the sensitivity of SCF to geometric parameters of KK tubular joints, ANSYS is used to build a geometric parametric model of a KK tubular joint, and FEM method is used to analyze the hot spot stress under various working conditions. The nominal stresses under different working conditions are calculated separately, and are compared with the hot spot stresses to obtain the SCFs under different geometric parameters. The sensitivity of SCF of KK tubular joint to dimensionless geometric parameters is obtained by sorting out and analyzing the calculation results. The results show that the SCF is related to the loading state and the structural form of tubular joint. On the premise of satisfying the structural layout, construction technology and other safety indicators, the analysis results can provide technical guidance for the structural design and fatigue analysis of KK tubular joints. |
| |
| Keywords: | jack-up platform truss leg KK tubular joint stress concentration factor geometric sensitivity |
|
| 点击此处可从《海洋工程》浏览原始摘要信息 |
| 点击此处可从《海洋工程》下载免费的PDF全文 |
