| 基于物理造波和主动消波的黏性数值波浪水槽开发 |
| |
| 引用本文： | 余 阳,周同明,段梦兰,赵天奉,孙成功,周学军.基于物理造波和主动消波的黏性数值波浪水槽开发[J].海洋工程,2019,37(3):42-50. |
| |
| 作者姓名： | 余 阳 周同明 段梦兰 赵天奉 孙成功 周学军 |
| |
| 作者单位： | 中国石油大学(北京)安全与海洋工程学院;西澳大学土木环境和采矿工程学院;中海油研究总院工程研究设计院 |
| |
| 基金项目： | 国家重点研发计划(2016YFC0303707) |
| |
| 摘 要： | 基于推板造波理论和摇板造波理论,在Open FOAM平台上采用重叠网格技术建立黏性数值波浪水槽,并使用一种结合SIMPLE算法和PISO算法的PIMPLE算法对数值模型进行求解。利用开发的数值模型通过数值收敛性测试和网格独立性测试分别重点研究了时间步长、库朗数和网格尺寸对数值精度和计算效率的影响。并对比研究了此数值模型分别嵌入层流模型和湍流模型的计算精度和计算效率。实现的规则波和二阶有限振幅波与理论结果和试验结果吻合,验证了此黏性数值波浪水槽的造波和主动消波功能。基于二维数值波浪水槽,进一步研究了三维数值造波,数值计算结果与理论结果吻合良好。研究结果不仅验证了重叠网格在二维和三维两相流体域中求解运动物体与流场交互的可靠性和正确性,而且为使用此黏性数值波浪水槽解决更复杂的海洋工程问题提供了依据。
|
| 关 键 词： | OpenFOAM 重叠网格 物理造波 主动消波 数值波浪水槽 三维造波 |
Development of a viscous numerical wave flume based on physical wave generation and active wave absorption |
| |
| YU Yang,ZHOU Tongming,DUAN Menglan,ZHAO Tianfeng,SUN Chenggong and ZHOU Xuejun.Development of a viscous numerical wave flume based on physical wave generation and active wave absorption[J].Ocean Engineering,2019,37(3):42-50. |
| |
| Authors: | YU Yang ZHOU Tongming DUAN Menglan ZHAO Tianfeng SUN Chenggong and ZHOU Xuejun |
| |
| Institution: | College of Safety and Ocean Engineering, China University of Petroleum, Beijing 102249, China;
School of Civil, Environmental and Mining Engineering, The University of Western Australia, Perth 6009, Australia;,School of Civil, Environmental and Mining Engineering, The University of Western Australia, Perth 6009, Australia;,College of Safety and Ocean Engineering, China University of Petroleum, Beijing 102249, China;,College of Safety and Ocean Engineering, China University of Petroleum, Beijing 102249, China;,College of Safety and Ocean Engineering, China University of Petroleum, Beijing 102249, China; and Development & Design Dept., CNOOC Research Institute, Beijing 100028, China |
| |
| Abstract: | A viscous numerical wave flume is established by using overset mesh technology based on the theory of piston wavemaker and the theory of flap wavemaker. The numerical model is solved by a PIMPLE algorithm based on the combination of the SIMPLE algorithm and the PISO algorithm. Using the test of the numerical convergence and grid independence, the effects of the time step, courant number and mesh size on the numerical precision and computational efficiency of the overset mesh model are studied. The numerical model uses the laminar flow model and the turbulence model separately. A comparative study of computational accuracy and computational efficiency is carried out for these models. The numerical calculation results agree well with the theoretical results and experimental results, and the wave-making and active wave-absorbing functions of the viscous numerical wave flume are verified. On the basis of 2D numerical wave flume, 3D wave generation is further studied, and the numerical results agree well with the theoretical results. This study not only verifies the reliability and correctness of solving the interactions between moving objects and flow fields with overset meshes in the two-dimensional and three-dimensional two-phase fluid domains, but also provides a basis for solving complex ocean engineering problems using this viscous numerical wave flume. |
| |
| Keywords: | OpenFOAM overset mesh physical wave generation active wave absorption numerical wave flume 3D wave generation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《海洋工程》浏览原始摘要信息 |
| 点击此处可从《海洋工程》下载免费的PDF全文 |
|
