| 新型非黏结柔性管接头的设计和分析研究 |
| |
| 引用本文： | 杨保成,迟明,王少鹏,朱克强,张宗政.新型非黏结柔性管接头的设计和分析研究[J].海洋工程,2016,34(6):118-122. |
| |
| 作者姓名： | 杨保成 迟明 王少鹏 朱克强 张宗政 |
| |
| 作者单位： | 四川工程职业技术学院 机电工程系，德阳 618000;杭州欧佩亚海洋工程有限公司，杭州 310012;宁波大学 海运学院， 宁波 315211;宁波大学 海运学院，宁波 315211;杭州欧佩亚海洋工程有限公司，杭州 310012 |
| |
| 基金项目： | 国家自然科学基金资助项目(11272160) |
| |
| 摘 要： | 针对传统非黏结柔性管接头安装时,由外管套扣压变形而引起的接头排气孔变形问题,研制了新型非黏结柔性管接头,不仅避免了排气孔的变形,而且提高了排气孔处的结构强度。运用ABAQUS有限元分析软件对管接头的扣压过程进行仿真分析,通过对比分析结果,验证了新型管接头的结构设计合理有效,从而为非黏结柔性管接头设计提供技术参考。
|
| 关 键 词： | 局部结构强度 可靠性 非黏结柔性管接头 排气孔 |
Design and analysis of a new type unbonded flexible pipe end fitting |
| |
| YANG Baocheng,CHI Ming,WANG Shaopeng,ZHU Keqiang and ZHANG Zongzheng.Design and analysis of a new type unbonded flexible pipe end fitting[J].Ocean Engineering,2016,34(6):118-122. |
| |
| Authors: | YANG Baocheng CHI Ming WANG Shaopeng ZHU Keqiang and ZHANG Zongzheng |
| |
| Institution: | Department of Mechanical and Electrical Engineering, Sichuan Engineering Technical College, Deyang 618000,China;Hangzhou OPR Offshore Engineering Co., Ltd., Hangzhou 310012, China;;Faculty of Maritime and Transportation, Ningbo University, Ningbo 315211, China;Faculty of Maritime and Transportation, Ningbo University, Ningbo 315211, China;Hangzhou OPR Offshore Engineering Co., Ltd., Hangzhou 310012, China; |
| |
| Abstract: | This paper addresses the problem of vent port deformation during installation of traditional unbonded flexible pipe end fittings. A new end fitting is designed to avoid the vent port deformation and improve the vent port structural strength. ABAQUS is used to analyse the process of fitting connection. By comparing the analyse results, the structural design is proven to be feasible. Therefore, this paper may provide a valuable technical reference for design of unbonded flexible pipe end fitting. |
| |
| Keywords: | local structure strength reliability unbonded flexible pipe end fitting vent port |
|
| 点击此处可从《海洋工程》浏览原始摘要信息 |
| 点击此处可从《海洋工程》下载免费的PDF全文 |
|
