首页 | 本学科首页   官方微博 | 高级检索  
     检索      

五圆柱体结构群绕流特性及互扰效应研究
引用本文:涂佳黄,张志豪,曹波,肖毅凡,梁经群.五圆柱体结构群绕流特性及互扰效应研究[J].海洋工程,2020,38(1):101-110.
作者姓名:涂佳黄  张志豪  曹波  肖毅凡  梁经群
作者单位:湘潭大学 土木工程与力学学院,湖南 湘潭 411105; 岩土力学与工程安全湖南省重点实验室,湖南 湘潭 411105,湘潭大学 土木工程与力学学院,湖南 湘潭 411105,湘潭大学 土木工程与力学学院,湖南 湘潭 411105; 中车株洲电力机车有限公司,湖南 株洲 412000,湘潭大学 土木工程与力学学院,湖南 湘潭 411105,湘潭大学 土木工程与力学学院,湖南 湘潭 411105
基金项目:国家自然科学基金青年项目(11602214);湖南省教育厅科学研究优秀青年项目(18B079);中国博士后科学基金资助项目(2017M622593);湖南省自然科学基金青年项目(2016JJ3117)
摘    要:基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。

关 键 词:五圆柱体  间距比  来流攻角  流动模态  互扰效应

Study on the characteristics and interference effect of flow around five circular cylinders
TU Jiahuang,ZHANG Zhihao,CAO Bo,XIAO Yifan and LIANG Jingqun.Study on the characteristics and interference effect of flow around five circular cylinders[J].Ocean Engineering,2020,38(1):101-110.
Authors:TU Jiahuang  ZHANG Zhihao  CAO Bo  XIAO Yifan and LIANG Jingqun
Institution:College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China; Hunan Key Laboratory of Geomechanics and Engineering Safety, Xiangtan 411105, China,College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China,College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China; CRRC Zhuzhou Locomotive Co., Ltd., Zhuzhou 412000, China,College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China and College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China
Abstract:Based on the Fluent fluid computing platform,the flow past five X-arranged circular cylinders has been investigated at Re=3900 by using the Large Eddy Simulation(LES)method.The effects of incidence angle(α)and spacing ratio(L/D)on the fluid force coefficients and vortex structures of five X-arranged circular cylinders in the wake are analyzed,while the interference mechanisms of flow around the cylinders are clarified.The study shows that the incidence angle and spacing ratio have a significant impact on the flow control and interference effects of the flow around five X-arranged cylinders.The high-velocity flow in the gap can be observed at small spacing ratios.And the flow interference among the cylinders is strong and complicated.The gap flow has a strong impact on the middle cylinder and the downstream ones,which gives rise to the change of the pressure distribution on the surface of the cylinders.Moreover,in the case of large spacing ratio,the wake effect is stronger than the gap flow one,whenα=0°and L/D≥5.0.However,for the case ofα=22.5°and L/D=7.0,the fluid flow characteristics on both sides are different between the downstream cylinder and the middle one.In addition,asα=45°and L/D=5.0,there is no vortex shedding in the wake region of the upstream cylinder,while there is the vortex street behind the middle one.In the case of L/D≥6.0,the positive and negative vortex structures are formed in the wake of the upstream and middle cylinders.
Keywords:five circular cylinders  spacing ratio  incidence angle  flow pattern  interference effect
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《海洋工程》浏览原始摘要信息
点击此处可从《海洋工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号