Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics |
| |
| Authors: | Chung-Won Lee Sung-Yong Park |
| |
| Institution: | 1. Professor, National Civil Defense and Disaster Management Training Institute, Ministry of Public Safety and Security, Cheonan, Chungcheongnam-do, Korea;2. Researcher, Institute for Advanced Construction Materials, Kangwon National University, Chuncheon, Gangwon-do, Korea |
| |
| Abstract: | The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method. |
| |
| Keywords: | Discontinuous screws laboratory and field tests low noise and vibration numerical analysis prebored screw pile method rotary penetration |
|
|
