Pasisar: Performances of a High and Very High Resolution Hybrid Deep-Towed Seismic Device |
| |
| Authors: | Nouzé Hervé Sibuet Jean-Claude Savoye Bruno Marsset Bruno Thomas Yannick |
| |
| Institution: | (1) Ifremer Centre de Brest, BP 70, 29280 Plouzané Cedex, France |
| |
| Abstract: | The Pasisar seismic acquisition system combines a source at the sea surface and a deep-towed single channel streamer. This unconventional device geometry reduces the width of the first Fresnel zone which increases the lateral resolution. However, the device acquisition geometry generates artifacts on seismic profiles and induces large incidence angles of the seismic signal. A specific processing sequence must be applied to the data to obtain a readable seismic section. Penetration of the seismic signal depends on the energy of the signal reaching the seafloor and on its incidence angle. Because of smaller source energy, 800 Joules Sparker data cannot be acquired in water depth larger than 1500 m for example, whereas there is no depth limit for the use of this system with air gun sources. Differential acoustic absorption of seismic frequencies (below 1000 Hz) in the water column is negligible when compared with wave fronts expansion. Thus, the horizontal resolution of any seismic system strongly depends on the frequency spectrum of the seismic source and on the travel distances. Pasisar and conventional seismic profiles being usually simultaneously recorded, we illustrate the interest of using a hybrid seismic device by comparing horizontal resolutions as well as signal-to-noise ratio obtained with both the Pasisar and conventional systems. In addition, by carefully picking time arrivals of a reflection on simultaneously recorded surface and deep-towed seismic records, it is possible to estimate the average interval seismic velocity. We present the simplified example of a horizontal reflector. |
| |
| Keywords: | Pasisar deep-towed seismic device high resolution seismic |
| 本文献已被 SpringerLink 等数据库收录！ |
|
