Flow and bed shear stresses in scour protections around a pile in a current |
| |
| Institution: | 1. Technical University of Denmark, DTU Mekanik, Section for Fluid Mechanics, Coastal and Maritime Engineering, Nils Koppels Allé Building 403, 2800 Kgs. Lyngby, Denmark;2. University of Texas at San Antonio, Department of Civil and Environment Engineering, BSE 1.334, One UTSA Circle, San Antonio, TX 78249, USA;1. ERI@N, Interdisciplinary Graduate School, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore;2. School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore;3. School of Civil and Environmental Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore;4. Lloyd''s Register Global Technology Center, 1 Fusionopolis Place, #09-11 Galaxis, Singapore 138522, Singapore;5. Lloyd''s Register Energy, 25 Union Terrace, Aberdeen AB10 1NN, United Kingdom;1. Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing, 100190, China;2. School of Engineering Science, University of Chinese Academy of Sciences, Beijing, 100049, China;3. Civil Infrastructure Operations Dept, China State Construction Engineering Corp. Ltd, Beijing, 100044, China;1. State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China;2. Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration (CISSE), Shanghai 200240, PR China;3. Centre for Marine Geotechnical Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China;1. State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University, 210098, China;2. School of Civil and Environmental Engineering, Nanyang Technological University, 639798, Singapore;3. Department of Civil and Environmental Engineering, The University of Auckland, 1142, New Zealand;1. Department of Civil, Environmental and Mining Engineering, University of Western Australia, Australia;2. Oceans Graduate School, University of Western Australia, Australia;3. State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian, China;4. HR Wallingford, Howbery Park, Wallingford, Oxon, UK |
| |
| Abstract: | Transport of bed sediment inside and beneath the scour protection may cause deformation and sinking of the scour protection for pile foundations. This may reduce the stability of the mono pile and change the natural frequency of the dynamic response of an offshore wind turbine installed on it in an unfavourable manner. Using physical models and 3D computational fluid dynamic (CFD) numerical simulations, the velocity and bed shear stresses are investigated in complex scour protections around mono piles in steady current. In the physical model the scour protections consisted of an upper cover layer with uniformly distributed coarse stones and a lower filter layer with finer stones. For the numerical simulations, the Flow-3D software was used. The scour protection layers were simulated with different numerical approaches, namely regularly arranged spheres, porous media, or their combinations (hybrid models). Numerical simulations with one or four layers of cover stones without filter layer were first computed. Three additional simulations were then made for a scour protection with a cover layer and a single filter layer. Finally, a simulation of a full scale foundation and scour protection was made with porous media approach.Based on the physical and numerical results, a method to determine the critical stones size to prevent motion of the base sediment is established and compared to a full scale case with sinking of scour protection (Horns Rev I Offshore Wind Farm, Denmark). It is also found that the CFD simulations are capable of calculating the flow velocities when the scour protection is represented by regular arranged spheres, while the turbulence in general is underestimated. The velocity can also be calculated using porous media flow approach, but the accuracy is not as good as for spheres. The deviation is more severe for more complex scour protections. In general, computational models provide valuable information for the prediction and design of scour protections for offshore wind farms. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
